Everything you need to build and launch Meta ads with the Ad Launcher, in one place.
Getting started
Set up the Ad Launcher
The first time you open the Ad Launcher for an ad account, a short setup opens. It saves the settings every new ad starts with, so you don't have to fill them in each time. It takes about a minute, and you can change everything later.
- Open Launch ads. The Ad account onboarding window opens on its own.
- Identity: pick the Facebook Page your ads run from. This is required. Then pick an Instagram Account, or leave it on Use the Facebook page.
- Click Next.
- Launch status: choose whether new Campaigns, Ad sets and Ads start Active or Paused. Click Next.
- Creative enhancements: tick the Meta enhancements new ads should start with. Click Next.
- Tracking: pick the Dataset (your pixel) that reports conversions, and add any URL parameters you want on every ad's link. Click Finish.
Each step saves when you click Next. If you close the window halfway, the steps you finished are kept.
Tip: to change these settings later, go to Launch defaults in the sidebar. See Change your launch defaults.
Switch ad accounts
Every sheet, template and default belongs to one ad account.
- Click the Ad account menu at the top of the sidebar.
- Pick the account you want to work in.
The launcher reloads with that account's ads, templates and defaults. If it is the first time you open that account, the setup window opens.
Find your way around
The sidebar
- Launch ads: where you build and launch your ads.
- Launch history: every batch you have launched, and how each ad did.
- Copy templates: saved copy you can reuse.
- Launch defaults: the settings every new ad starts with.
- User guide: this guide, in a new tab.
- Get help: the help center, where you can also contact us.
- Return to Ads Manager: back to Breezeway's Ads Manager.
The launch page
Your ads sit in a sheet, one row per ad. Click the sheet's name at the top to rename it.
Next to the name, the save indicator shows All changes saved, Saving… or Not saved. Every change saves on its own. There is no save button.
Uploading creatives
Add a creative to an ad
- On Launch ads, click Create ad (or Add ad on an empty sheet). A new row appears.
- Click the empty creative box on the row.
- Pick an image or video from your computer.
The file uploads in the background, so you can keep filling in the ad. The badge next to Ad name shows whether it will run as an image or a video ad.
To swap a creative: click it, then click Change under Feeds.
To remove it: hover it and click ×, or click Remove in the same window. This also removes any media you added for other placements.
Use different media for each placement
One creative runs everywhere by default. If you have a version in another shape, like a 9:16 for Stories, you can give that placement its own media.
Next to each creative, the row shows two smaller tiles: Stories and Reels and Right column. They show how your creative looks there.
- Click the creative, or one of the tiles. The Media placements window opens.
- Under the placement you want to change, click Upload its own media and pick a file. You can also drop a file onto it.
- Click Done.
| Placement | Where it shows | Best shape |
|---|---|---|
| Feeds | Feeds, Ads on Facebook Reels | 4:5 (1:1 also fits) |
| Stories and Reels | Stories, Status, Reels, In-stream for reels, Apps and sites | 9:16 |
| Right column | Right column, Search results | 1:1 |
Under each one you see the file's size in pixels, and either Fits or Best at with the recommended shape. A shape that doesn't fit still launches: Meta fits it itself.
- To go back to the main creative: click Reset, or hover the tile on the row and click ×.
- A placement that says Same as Feeds uses your main creative.
- All media on one ad must be the same kind: all images or all videos.
- Once a placement has its own media, the badge on the row reads Placement opt.
- Doing this for many ads? See Upload media for each placement in bulk.
Create many ads at once
Have a folder of creatives? Bulk upload makes one ad per file and names each ad after its file.
- Click Bulk upload.
- Drag your images and videos into the window, or click Browse files.
- Check the list. Each file shows its type, size and the Ad name it will get.
- Change any Ad name you like.
- Click × to drop a file.
- Click Upload more creatives to add more.
- Click Add [number] ads to sheet.
The new ads appear in your sheet right away, and the files upload in the background.
Files that can't be used are greyed out with the reason in red, for example "Too large". They are not added. The count at the top tells you how many ads you will get.
Tip: nothing uploads until you click Add ads to sheet. Click Cancel and nothing is kept.
Same creative in several shapes? Files that share a name and end with a ratio, like _9x16, are combined into one ad. See Upload media for each placement in bulk.
Upload media for each placement in bulk
Have the same creative in several shapes? Give the files the same name, end each name with its ratio, and bulk upload builds one ad with the right media in every placement.
-
Name your files. Use the same name for every shape of a creative, and end it with the ratio:
File name ends with Goes to _4x5Feeds _9x16Stories and Reels _1x1Feeds, or Right column if Feeds is taken no ending Feeds -
Click Bulk upload and add all the files at once.
-
Check the list. Files that share a name show as one ad, with its number of placements. The ad is named after the files, without the ending.
-
Click Add [number] ads to sheet.
Example: summer-sale_4x5.jpg, summer-sale_9x16.jpg and summer-sale_1x1.jpg become one ad called "summer-sale". The 4:5 runs in Feeds, the 9:16 in Stories and Reels, and the 1:1 in the Right column.
- The ending can follow
_,-or a space, in upper or lower case. - A file that matches no other file becomes its own ad and keeps its full name.
- Click Ungroup to split an ad into one ad per file. Click Regroup on a file to put it back.
- Want one ad per file every time? Turn off Group media.
- Hover Placement grouping in the window to see the endings anytime.
Supported files and sizes
| Type | Formats | Max size |
|---|---|---|
| Images | JPG, PNG, GIF | 15 MB |
| Videos | MP4, MOV | 1 GB |
Best sizes for Meta placements
| Placement | Ratio | Pixels |
|---|---|---|
| Feed | 4:5 | 1080 × 1350 |
| Stories, Reels | 9:16 | 1080 × 1920 |
| Right column | 1:1 | 1080 × 1080 |
Have more than one shape of the same creative? See Use different media for each placement.
Keep text and logos away from the edges. In 9:16, the app's buttons cover the top and bottom.
Tip: hover Creative best practices in the bulk upload window to see this anytime.
Track your uploads
While files upload, a panel in the bottom right corner shows each one.
Each file moves through these steps:
| Status | Meaning |
|---|---|
| Reading… | Preparing the file. |
| (progress bar) | Uploading. |
| Sending to Meta… | Passing the file to Meta. |
| Meta is processing this… | Meta is getting the file ready. Long videos can take a few minutes. |
| Ready | Done. The ad can launch. |
| Already in your library | You uploaded this file before. The saved copy is used. |
You don't need to wait. Keep building your ads, or even switch pages: uploads keep going.
- Click the arrow to collapse the panel.
- If an upload fails, click the retry button next to it.
- Once everything is finished, click × to close the panel.
Note: an ad can't launch until its creative is Ready.
Building your ads
Choose a campaign and ad set
Each ad picks its own campaign and ad set, so one launch can fill several ad sets.
- In the Campaign & Adset column, click Campaign and pick one. Type to search.
- Click Ad set and pick one from that campaign.
Changing the campaign clears the ad set, since ad sets belong to one campaign.
Tip: to send many ads to the same place, use Bulk edit > Campaign & ad set. See Edit many ads at once.
Create a new campaign
You can create a campaign without leaving the launcher.
- Open the Campaign picker on any row and choose New campaign.
- Fill in:
- Campaign name
- Status: Active or Paused
- Objective: Sales or Leads
- Budget strategy: Campaign budget (CBO) shares one budget across the campaign. Ad set budgets (ABO) gives each ad set its own.
- Budget period (Daily or Lifetime) and Amount, for CBO only
- Click Create campaign, then Done.
The new campaign is selected on the row.
Important: the campaign is created in your Meta ad account as soon as you click Create campaign, not when you launch your ads.
Note: Leads means leads on your own website, counted by your pixel. Meta instant forms aren't supported yet.
Create a new ad set
You can create an ad set without leaving the launcher.
- Pick a campaign on the row first.
- Open the Ad set picker and choose New ad set.
- Fill in each section:
- Ad set name and Status
- Customer life cycle strategy, for Sales campaigns only: Get conversions from all audiences, or Acquire new customers to leave out people who already bought from you. The launcher fills in the existing customers set in your Meta ad account to exclude. You can change them, and at least one is needed.
- Conversion: the Performance goal (Number of conversions or Value of conversions), the Pixel, the Conversion event, for example Purchase or Lead, and the Attribution windows
- Budget: with ad set budgets (ABO), the Period and the Amount, in your ad account's currency. With a campaign budget (CBO), the campaign's budget shows next to the title, and you can set spending limits instead. See Set ad set spending limits.
- Schedule: off, the ad set runs from approval until stopped. Turn it on to pick Starts at and Ends at. Times use your ad account's time zone, shown under the fields. A lifetime ad set budget needs an end date, so the switch stays on.
- Audience: the Locations to target, and any Custom audiences to include or exclude. See Target or exclude custom audiences.
- Click Create adset, then Done.
The new ad set is selected on the row.
Important: like campaigns, the ad set is created in Meta right away.
Note: some countries require ads to name a verified advertiser and payer. The form tells you when one of your countries does.
Note: the launcher builds conversion ad sets. If a campaign uses a goal the launcher can't set, the form says so. Create that ad set in Meta Ads Manager and it will appear in the picker.
Target or exclude custom audiences
Use the custom audiences and lookalikes in your ad account to steer who sees an ad set.
- In New ad set, scroll to Audience.
- Under Custom audiences, pick from either list:
- Include: people Meta should favour, for example a lookalike of your buyers.
- Exclude: people who never see the ads, for example recent buyers.
- Type to search by name. Pick as many as you need. An audience can be on one side only.
Included audiences are suggestions. Advantage+ audience is on, as the Advantage+ on tag shows, so Meta may also show the ads to people outside the audiences you include when it expects better results. The Suggestion tag next to Custom audiences is the reminder. Excluded audiences are strict.
Tip: to keep an ad set strictly inside an audience, create it here, then edit the ad set in Meta Ads Manager.
Note: the lists show the custom audiences in your ad account. To use a new one, create it in Meta Ads Manager under Audiences, then open New ad set again. An audience Meta can't deliver to yet is listed with Meta's reason.
Note: Acquire new customers can't be combined with included audiences. Use one or the other.
Set ad set spending limits
With a campaign budget (CBO), Meta moves the budget between ad sets. A spending limit makes sure an ad set gets at least, or at most, part of it.
- In New ad set, on a campaign with a campaign budget, find Budget. The campaign's budget shows next to the title.
- Turn on Ad set spending limits.
- Choose Use % value, a share of the campaign budget, or the currency value, an amount in your ad account's currency. Switching clears both fields.
- Set a minimum, a maximum, or both. Leave a field empty for no limit. Under each field, the launcher shows the same limit in the other unit.
The fields follow the campaign's budget:
| Campaign budget | Fields |
|---|---|
| Daily | Average daily minimum and Average daily maximum, averaged over a week |
| Lifetime | Lifetime minimum and Lifetime maximum |
Good to know:
- Percentages go in steps of 5%, from 5% to 100%.
- A minimum can't be higher than the maximum or than the campaign budget.
- A percentage follows the campaign budget if it changes later. An amount stays fixed.
- Setting both a minimum and a maximum can raise costs and lower delivery. The launcher warns you, but still lets you create the ad set.
Note: with ad set budgets (ABO), each ad set already has its own budget, so spending limits don't show.
Write your ad copy
On each row, fill in:
- Primary Text: the main text above your creative.
- Headline: the bold line under it.
- Description: the smaller line under the headline. Optional.
- Call to Action: the button, for example Shop now.
Variants: click Add variant under Primary Text or Headline to give Meta up to 5 versions to test. Meta picks the best performer for each viewer. A variant that repeats an earlier one is flagged and not sent.
Tip: to reuse copy you write often, save it as a template. See Copy at scale.
Set the link, pages and tracking
These start filled from your launch defaults. Change them per ad when you need to.
- Link: the Destination URL people land on. Display URL is the shorter link shown on the ad. Optional.
- Pages: the Facebook Page and Instagram account the ad runs from.
- Enhancements: Meta's creative enhancements for this ad. The list changes with the creative type, since images and videos get different ones.
- UTM Parameters: added to the end of the destination URL so you can track the ad in your analytics.
Duplicate or delete ads
- Tick the checkbox on the rows you want. Tick the header checkbox to select all.
- Click Actions.
- Choose Duplicate to copy the ads with their creatives and placement media, or Delete to remove them.
Note: Delete doesn't ask to confirm. It only removes the ads from your sheet: nothing has been sent to Meta yet.
Edit many ads at once
Set the same value on many ads in one go.
- Optional: tick the ads you want to change.
- Click Bulk edit and pick the field: Campaign & ad set, Primary text, Headline, Description, Call to action, Pages, Link, Creative enhancements or UTM parameters.
- Set the value.
- Click Apply to [number] selected, or Apply to all [number] ads.
Start an ad paused
Every ad starts Active or Paused based on your launch defaults. To change one ad:
- Find the switch at the top right of the ad's creative.
- Flip it. Hover it to check: Starts active or Starts paused.
A paused ad is created in Meta but doesn't spend until you turn it on in Ads Manager.
Tip: next to the switch, a marker shows whether the ad is Ready to launch. Hover it to see what is missing.
Copy at scale
Create a copy template
A copy template saves primary text, headlines and a description, so you can apply them to new ads in one click.
- In the sidebar, click Copy templates.
- Click New template.
- Name your template.
- Fill in Primary text, Headline and Description. Click Add variant for more than one version.
- Click Create template.
Apply a template
- On Launch ads, tick the ads you want to fill.
- Click Apply template and pick a template.
- Check the comparison. For each field, Current shows what the ads have now and Template shows what they will get. Values that will be replaced are highlighted.
- Untick any field you want to keep as it is.
- Click Apply.
Tip: if the window says "Only empty fields will be filled", none of your existing copy will change.
Edit or delete a template
- In the sidebar, click Copy templates.
- Click a template in the list. Use Search templates to find it.
- Make your changes and click Save. Click Discard to undo them.
- To remove it, click Delete, then Delete again to confirm.
Editing a template doesn't change ads you already applied it to.
Import copy from a CSV
Fill the copy of many ads at once, from an AI chat like ChatGPT or Claude, a spreadsheet, or a copywriter. Each line of the CSV is one ad, matched by its ad name.
Before you start: give your ads their final names. Lines are matched to ads by name, and ads that share a name get the same copy.
- On Launch ads, tick the ads you want to fill.
- Click Apply template > Import from CSV.
- Get a CSV to fill in. Choose one:
- With AI: click Copy AI prompt and paste it into ChatGPT or Claude, in the same chat as your brief or creatives. The AI may ask about the angle of each ad first, then replies with the filled-in CSV. See Write ad copy with an AI chat for the full walk-through.
- In a spreadsheet: click Download CSV, fill it in Google Sheets or Excel, and export it as CSV.
- Paste the AI's whole reply into the box, or click Upload a file instead.
- Click Preview and compare each ad's current copy with the new copy. Untick a field to leave it as it is, or click Edit input to fix the CSV.
- Click Apply to [number] ads.
Nothing changes until you click Apply.
What goes in the CSV
| Column | What goes in it |
|---|---|
name |
The ad's name. Don't change it: it's how the line finds its ad. |
primary_text_1 to primary_text_5 |
Up to 5 primary texts. |
headline_1 to headline_5 |
Up to 5 headlines, about 255 characters each at most. |
description |
One line. |
Leave all of a field's columns empty to keep that field's current copy. Filled columns replace the whole field.
If a line doesn't apply: the preview lists any line whose name matches none of the ticked ads. Check the spelling, or tick that ad.
Write ad copy with an AI chat
Let ChatGPT, Claude or another AI chat write the copy for your ads, using the brief and creatives you have already given it, then bring all the copy back in one paste.
- Set up the chat. In your AI chat, share your creatives and a short brief: the brand, the campaign, the tone and any offer. You can also do this after pasting the prompt.
- Pick your ads. On Launch ads, give your ads their final names, tick them, and click Apply template > Import from CSV.
- Copy the prompt. Click Copy AI prompt. The button changes to Copied.
- Paste it into the chat and send it. The prompt holds your ads as a CSV, plus instructions for the AI: write the copy using the brief and creatives in the conversation, keep each ad's name, and reply with the CSV only.
- Answer any questions. If the chat has no brief or creatives yet, or the AI wants to know the angle of each ad, it asks first. Answer, or tell it to go ahead.
- Copy the reply. Use the copy button on the CSV block, or copy the whole reply: the launcher finds the CSV inside it.
- Paste it back. Back in the launcher, the Import copy from CSV window is still open. Paste into the box and click Preview.
- Check and apply. Compare each ad's current copy with the new copy, untick any field you want to keep, and click Apply to [number] ads.
Tips
- Want changes? Ask for them in the same chat, copy the new reply, click Edit input and paste again.
- Don't rename the ads in the reply: the name is how each line finds its ad.
Launching
Launch your ads
- Check every ad is ready. The Launch button is grey until they all are.
- Click Launch [number] ads.
- Check the summary: how many ads start active and how many start paused.
- Click Launch.
The launcher opens the launch's page in Launch history, where you can watch each ad being created. When you go back to Launch ads, a fresh, empty sheet is waiting.
Important: launching creates real ads in your Meta ad account. Active ads can start spending right away.
If some ads aren't ready, the window lists each one and what it needs, for example "needs headline, destination URL". The whole sheet launches together, so click Back to the sheet, finish those ads, and try again.
Every ad needs: a creative that has finished uploading, a name, a campaign, an ad set, primary text, a headline, a destination URL and a Facebook Page.
Check your launch history
- In the sidebar, click Launch history.
- Each launched sheet shows who created it, when it launched, and its status.
- Click a sheet to see every ad in it, its ad set, and its Result:
| Result | Meaning |
|---|---|
| Queued / Creating | Still on its way to Meta. |
| Created | The ad exists in Meta. |
| Failed | Meta refused the ad. The reason shown is Meta's own wording. |
| Not launched | The ad wasn't ready when the sheet launched, so it was not sent. |
Fix a failed ad
When Meta refuses an ad, you can send it back to your sheet, fix it and launch it again. Ads that were created are not affected.
- Open the launch in Launch history.
- Read the reason next to the failed ad.
- Click Copy to sheet. The button changes to In sheet.
- Click Back to launcher. The ad is in your sheet with everything it had.
- Fix what Meta flagged and launch again.
Settings
Change your launch defaults
Launch defaults are the settings every new ad starts with. They are saved per ad account. You can still change any of them on a single ad before launching.
- In the sidebar, click Launch defaults.
- Change what you need. Each section saves on its own:
- Identity: the Facebook Page and Instagram Account your ads run from.
- Launch status: whether new Campaigns, Ad sets and Ads start Active or Paused.
- Creative enhancements: the Meta enhancements new ads start with.
- Tracking: the Dataset (pixel) for conversions, and the URL parameters added to every ad's link. Meta fills in values like
{{campaign.name}}when the ad runs.
- Click Save Changes in that section. Click Revert changes to undo.
Fields you have changed but not saved are marked Unsaved change.
Note: new defaults apply to ads you add from now on. Ads already in your sheet keep their values. Use Bulk edit to update them.
Help
Frequently asked questions
Do I need to save?
No. Every change saves as you go. Check the indicator next to the sheet name: it says All changes saved when everything is stored.
What happens if I close the tab?
Nothing is lost. Your sheet is waiting when you come back. Uploads that were still running need the tab open to finish, so let the upload panel show Ready first.
Does anything go to Meta before I launch?
Only new campaigns and ad sets you create from the pickers. Your ads go to Meta only when you click Launch.
Can I launch only some of my ads?
Not yet. The whole sheet launches together. To hold some ads back, set them to start paused, or delete them from the sheet before launching.
Why is my Launch button grey?
At least one ad is missing something. Click it anyway: the window lists each ad and what it needs.
Why isn't my Facebook Page listed?
The launcher lists the pages you can advertise with on this ad account, including pages shared with your business from another Facebook business. If one is missing, check in Meta Business Settings that the page is shared with the business that owns the ad account.
Why can't I see my Instagram account?
Pick a Facebook Page first. The Instagram accounts listed are the ones connected to that page.
Which ad types are supported?
Single image and single video ads, each with optional media per placement. Carousels and existing posts are not supported yet.
Can I create lead form ads?
Not yet. Leads campaigns send people to your website and count leads with your pixel.
Get help
Click Get help at the bottom of the sidebar to open the help center. If you can't find your answer in this guide, contact us from there.
Suggest a feature
Don't see what you're looking for? Suggest a feature at support@breezeway.co.